What is the best way to maintain stage lighting equipment?

     Learn about some of VanGaa's customerstoday and ask them how they maintain their lighting equipment for a long time.

      ONE: Precautions for weekly equipment inspection

       1: During the weekly inspection, the connection of the equipment is mainly detected, including the power connection, the DMX512 connection, etc., to see if there is any looseness, whether there is a breakpoint, and so on.

      Two: Monthly equipment maintenance and proper adjustment

       1: Lamp position adjustment: Because some lamp positions will move or the guest area will change during use, resulting in changes in the lamp position, so the equal position adjustment should be carried out every month, of course, including the computer controlled by the DMX512 signal. lamp.

       2: Detection of mechanical equipment: including the motor of the computer light, the motor of the color changer, the nozzle of the special effect equipment, etc.

       3: Check all lines: Check whether there are breakpoints, damages, and whether there is leakage, because it is inevitable that some human factors will cause various unexpected situations in the line during use, such as exposed wires being stepped on and broken, and wires that are often plugged and unplugged. There may be breakpoints, occasional leakage or even short circuit due to sprinkled beverage line, so this detection should be very careful, and this detection requires weak current to complete.

       4: Clean up the dust and garbage inside and outside the lamp. There will be some garbage in the lighting itself, such as the garbage left in the lamp body after the bulb explodes, and the computer lights exposed in the audience area for a long time, and the special effects machinery is easy to fall into some garbage, so the garbage and dirt outside the lamp should be removed. Wipe clean and remove the garbage inside the lamp. This link needs cleaning cooperation.

       5: Check all fire protection equipment. Lighting is the most concentrated type of work in the circuit. Strong electricity enters and weak electricity exits. There are many related equipment and more related wires. Therefore, fire prevention is the top priority in lighting work.

       In addition to the above inspections, the lighting engineer must have a good understanding of all the equipment and the environment. If there is something, please deal with it in time, so that you can get a good visual environment and have enough security.