Views:0 Author:Site Editor Publish Time: 2021-07-09 Origin:Site
LED tricolor lights are generally used for meeting room lighting. Commonly seen are hanging or embedded 4-tube 55W lamps or 6-tube 55W tri-color lights. The meeting rooms generally use built-in, and the multi-functional hall meeting room generally uses the built-in. LED tricolor lights in conference rooms can be understood as flat soft light with LED light source, because LED and tricolor are two different light sources. Compared with traditional thermal light sources, LED and tricolor have low temperature and high luminous efficiency. , Color temperature, long life and other characteristics, but LED is more energy-saving and environmentally friendly than three primary colors, LED has become the mainstream trend now, leading to the habit of calling conference room LED three primary color lights.
Embedded LED tricolor light
The LED tri-color lights in the conference room mainly include embedded LED conference lights and hanging LED flat-panel soft lights. Embedded is generally used in video conference rooms with a ceiling, and the installation is flush with the ceiling; the hanging type is generally used in the multi-functional hall meeting room and multimedia meeting room without a ceiling, and it is installed by hanging. Because of its high color rendering index (high color reproduction), accurate color temperature, completely silent and no glare, energy saving and environmental protection, it has become a widely used lamp in various conference rooms.
Pendant LED tricolor light
In the video conference room and multi-functional conference room, the traditional lighting fixtures are not bright enough due to the problem of low brightness and low color rendering. The rostrum area and the speaker’s face are seriously dark. The low color reproduction of light causes picture distortion. The meeting room LED tricolor lights perfectly solve the above lighting problems. The signal converter is equipped with a signal converter that can directly convert the dimming DMX512 signal into an RS232 signal for the central control system dimming use, without the need for a relatively cumbersome and 512 lighting console. Can solve the dimming problem.