The basic form of led studio light

Traditional small and medium-sized studios generally use 1000W/2000W spotlights and tri-color soft lights for lighting. Therefore, all studio lighting should use LED studio fresnel spotlights for lighting. The first thing to consider is that it can replace the above two lamps. LED studio fresnel spotlight, namely LED studio fresnel spotlight and LED soft panel light.

一. LED studio fresnel spotlight

The LED studio fresnel spotlight is the same as the traditional heat source spotlight, with a beam angle of 10°～60° and a good spotlight effect. Its function can completely replace the traditional heat source spotlight, but its power is very low. Currently, there are three specifications of 70W/100W/200W that are mostly used. Compared with the heat source spotlight, the LED studio fresnel spotlight is more convenient to dimming, and the light efficiency is higher. The light effect of 100W is equivalent to that of the 1000W heat source spotlight.

Compared with halogen tungsten spotlight, LED studio fresnel spotlight has the following remarkable features:

1. Use high color rendering index LED as light-emitting element;

2. Solid-state light-emitting devices, with a life of up to 50,000 hours, are a new generation of green and environmentally friendly light sources;

3. High-power-density LED modules and high-efficiency aspheric concentrating system, the lamps have high luminous efficiency, 90% energy saving than traditional halogen tungsten spotlights;

4. Built-in DMX512 signal decoding and PWM dimming power supply, brightness adjustment range: 0-100%;

5. Following the design concept and method of using traditional spotlights, lighting engineers are familiar with using them.

二. LED soft panel light

LED soft panel light generally uses high color rendering index and low power LED as the light-emitting element. A number of small LED beads are evenly arranged to form a large-area matrix to emit light. It has high luminous efficiency, good color rendering, low glare value and long life. Advantages, it can completely replace the traditional three-color cold light lamp. Compared with the three-color cold light lamp, the LED soft panel light generates less heat, has lower power, and is more energy-efficient.

Compared with the traditional three-color cold light lamp, LED soft panel light has the following remarkable features:

1. Use high color rendering index LED as light-emitting element;

2. The LED light source is a solid-state light-emitting device with a lifespan of up to 50,000 h;

3. Use low-power LEDs to form surface light source lighting, with high light transmittance soft light board, the light output is soft and uniform, without infrared and ultraviolet;

4. Equipped with grating and soft light film, so that the light is glare-free and not dazzling;

5. The lamp has high luminous efficiency, which is 50% energy-saving than traditional three-color fluorescent lamps;

6. The brightness and color temperature are controlled by DMX512 signal control and local control, and the brightness adjustment range is 0-100%.