English 
Views: 0 Author: Site Editor Publish Time: 2023-09-21 Origin: Site
0-10V dimming is a way to change the brightness of an electric light source by using a range of direct current (DC) voltage from 0 to 10 volts. 0-10V dimming is the easiest way to control the brightness of lights. It allows for smooth operation and dimming to 10%, 1%, or even 0.1% of full brightness. At 10 volts, the light is as bright as it can get. The lights go to their lowest setting when the voltage drops to zero.
Sometimes, you may need a switch to turn them off completely. This simple lighting management system works with your LED lights. Thus, giving you different lighting options and setting the mood. A 0-10V dimmer is a reliable way to make lighting that you can change to fit any mood or task. Or you can create an elegant atmosphere in places like bar and restaurant seating.
DALI was made for the lighting business, like 1-10V. Various vendors sell parts for controlling lighting. Such as LED drivers and sensors with DALI and 1-10V interfaces. But that’s pretty much where the similarities end.
The main ways that DALI and 1-10V are different from each other are:
You can tell the DALI system what to do. Grouping, setting scenes, and dynamic control become possible like changing which sensors and switches control which lights fixtures when the office’s layout changes.
Unlike its predecessor, an analog system, DALI is a digital system. This means that DALI can dim lights consistently and let you control them more precisely.
Because DALI is a standard, things like the dimming curve are also standardized. So devices made by different companies can work together. Because the 1-10V dimming curve isn’t standardized. So using drivers from different manufacturers on the same dimming channel could lead to unexpected results.
One problem with 1-10V is that it can only control basic on/off and dimming functions. DALI can control and change colors, test emergency lighting and give feedback. It can also make complicated scenes, and do much more.
DT8 commands and features are only for managing colors, but you can use DT6 functions with any LED driver.
You can use Part 207, Part 209, or both for a color-changing LED driver. In both cases, Parts 101 and 102 are also implemented.
A single DALI short address is all that is required for a DT6 LED driver to adjust the brightness of a string of LEDs in accordance with a typical dimming curve.
One DALI short address can control the outputs of any number of DT8 LED drivers. This lets a single channel control both the color temperature and brightness of the light.
By using DT8, you can reduce the number of drivers needed for an application, the length of the installation’s wiring, and the number of DALI addresses. This makes design and commissioning easier.
DT8 Wiring Diagram
Protocols like KNX, LON, and BACnet control and track the different systems and appliances in a building. Since you can’t connect these protocols to any LED drivers, they can’t be used to control lights.
But DALI and DALI-2 were made with lighting control in mind from the start. Their command sets include many commands that are only used for lighting. Dimming, changing colors, setting up scenes, doing an emergency test and getting feedback, and lighting based on the time of day are all part of these functions and controls. A wide range of lighting control parts, especially LED drivers, can connect directly to DALI.
Building management systems (BMSs) often use KNX, LON, BACnet, and other similar protocols. They use it to control the whole building. That also includes the HVAC, security, entry systems, and lifts. DALI, on the other hand, is used to control only the lights. A gateway connects the building management system (BMS) and the lighting system (LSS) when needed. This lets the SPS turn on the DALI lights in the hallways in response to a security alert.
DALI lighting solutions use a master-slave architecture. So that the controller can be the information hub and the luminaires can be the slave devices. The slave components respond to requests from the control for information. Or the slave component carries out tasks that have been planned, such as ensuring the unit works.
You can send the digital signals over a control wire or bus with two wires. Even though cables can be either positively or negatively polarized. It is common for control devices to be able to work with either. You can wire DALI systems with standard five-wire cabling, so special shielding is unnecessary.
Since a DALI system doesn’t need wiring groups, you can connect all wires parallel to the bus. This is a significant change from traditional lighting systems. Because the commands sent from the control include all the information needed to turn on the lights, there is no need for mechanical relays. Because of this, the wiring for DALI lighting systems is simple, which gives them more flexibility.
Once you complete the wiring, the software on the controller can be set to work with the system. Because the system is flexible, you can build and use different lighting situations and programs without changing the physical wiring. All the light’s settings are very flexible, so you can change the curves and ranges of how bright it gets.
DALI is a lighting technology that you can change and is cheap. Most of the time, you can find these types of centralized lighting systems in big commercial spaces. DALI is mainly used in businesses and institutions. But people are starting to use it more often in their homes as they look for better ways to control their lights.
Even though you can add a DALI system to a building that is already up. DALI works best when designed and built from the ground up. This is because when you put in place a brand-new DALI system, there is no need for separate lighting control circuits. Retrofitting an old system but makes it impossible to install the simpler and more efficient DALI wiring system because the control circuits are already in place.
