54 different ways of using 3w LED par light

54 3w LED par lights generally have two kinds of full-color and white light, which can be selected according to the stage scene lighting. There are 3 to 4 kinds of full-color LED lamp beads, 12 red, 14 green, 14 blue, and 14 white. The mixed colors are rich and the colors are bright. They are commonly used rendering lights for stage performances, weddings and bars. The top light and back light on the stage; white light is a color of LED lamp beads, which illuminates the beam and has high brightness, and is used for stage surface lighting. It is installed at a 45° angle in front of the stage.

54pcs 3w LED par light parameters:

Light source: 54 3W LED lamp beads

Power supply voltage: AC100～240V, 50/60Hz

Rated power: 200W

Number of lamp beads: Red: 12, Green: 14, Blue: 14, White: 14

Light source life: 50000 hours

Light angle: 15/25/45/60 degrees

Dimming: 0～100% linear dimming

Control panel: digital display + four buttons

Channel mode: 8CH

Protection level: IP20

Heat dissipation method: cast aluminum chassis for heat dissipation

Control mode: DMX512 control/manual mode

Ambient temperature: -25℃～+45℃

Accessories: power cord, signal cord

Net weight/Gross weight: 8.5KG

Lamp body size: 350*290*290MM

54pcs 3w LED par light

Rekiss 54 3w LED par lights are environmentally friendly and energy-saving, and energy-saving more than 90% than traditional pa lights; long service life, the reason for the life of traditional par light bulbs has to be replaced frequently, and the service life of LED par lights can reach more than 50,000 hours ; High brightness, low heat, traditional par light has high heat, LED par light is a cold light source and will not produce heat radiation to the environment.